
Jumper Blocks Intel® Workstation Board S5520SC TPS
Revision 1.7
Intel order number: E39530-010
120
3. Move the BIOS recovery jumper (J1E5) from the default operating position (covering
pins 1 and 2) to the enabled position (covering pins 2 and 3).
4. Close the workstation chassis.
5. Reconnect the AC power cord and power up the workstation.
6. Perform the BIOS Recovery procedure as documented in the BIOS Release Notes.
7. After successful completion of the BIOS recovery, the “BIOS has been updated
successfully” message displays.
8. Power down the system and remove the AC power cord.
9. Open the workstation chassis.
10. Move the BIOS recovery jumper (J1E5) from the enabled position (covering pins 2 and 3)
to the disabled position (covering pins 1 and 2).
11. Close the workstation chassis.
12. Reconnect the AC power cord and power up the workstation.
Warning: DO NOT interrupt the BIOS POST during the first boot after BIOS recovery.
Komentarze do niniejszej Instrukcji