Intel CUSL2K Instrukcja Użytkownika Pobierz pdf (Strona 41)

ASUS CUSL2K User’s Manual 41

3. HARDWARE SETUP

Connectors

3. H/W SETUP

24) ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup-

ply will only insert in one orientation because of the different hole sizes. Find the

proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply (minimum recommended

wattage: 200 watts; 235W for a fully-configured system) can supply at least 20

amperes on the +5-volt lead and at least 10mA (750mA recommended) on the +5-

volt standby lead (+5VSB). Your system may become unstable/unreliable and may

experience difficulty in powering up if your power supply is inadequate. For Wake-

On-LAN support, your ATX power supply must supply at least 750mA +5VSB.

CUSL2K

CUSL2K ATX Power Connector

+3.3 Volts

-12.0 Volts

Ground

Power Supply On

Ground

-5.0 Volts

+5.0 Volts

Power Good

+12.0 Volts

+3.3 Volts

Ground

+5.0 Volts

Ground

+5.0 Volts

Ground

+5V Standby

25) Power Supply Thermal Sensor Connector (2-pin JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor

cable to this connector.

CUSL2K Thermal Sensor Connector

CUSL2K

JTPWR

Power Supply

Thermal Sensor

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 121 122

Brak uwag

Intel CUSL2K Instrukcja Użytkownika Strona 41